SGM Series

    Our Products / Self-Contained Emergency Lighting / SGM Series

    Previous
    Next

    Self-Contained Emergency Light Luminaires

    The self-contained emergency light has both a motion and a light sensor to provide maximum functionality for the user for multiple use cases. During power outages the unit will provide illumination using battery power. During normal power conditions, if the surrounding area is dimmer than 5 Lux and the unit detects a person walking by, it will automatically provide illumination using mains power and will turn off automatically after 15 seconds when there is no one left in the area.

    Technical Specifications​
    Mode of Operation
    Non-Maintained
    Operation Temperature
    -10 to 50°C
    Input Voltage
    220-240VAC / 50Hz
    LED Lamp Power
    9W / Bulb
    Color Temperature
    Daylight (6000K ± 250K)
    Luminous Intensity
    726 lm, Daylight
    Rated Beam Angle
    45Deg
    Battery Type
    Lithium Iron Phosphate (LiFePO4)
    Protection Features
    • AC,DC Fuse.
    • Battery Low Voltage Cut-Off
    • Surge Protection
    Testing Systems
    Manual Test
    Charging Method
    3 Steps Charger System
    Charging Period
    10-15 Hrs
    Backup Time
    3.0 Hrs.
    Housing
    Plastic ABS Casing and Electro-galvanized
    steel sheet 1mm. Thick
    Dimensions (LxWxH)
    210 x 70 x 216 mm
    Weight
    1.36 Kg
    Degree of Protection
    IP20
    Mounting
    Wall Surface
    Standards / Compliance
    • TIS.902 Part2(22)-2560
    • TIS.1955-2551
    • ISO9001
    • CE

    Features

    Bulb

    • Highly efficient and super bright LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours.

    Battery

    • Use Lithium Iron Phosphate (LiFePO4) 3.2V-6000mAh, backup power for 3 hours.It has the advantages of light weight, long service life and high power. It also causes less pollution

    Functions

    • The motion sensor is capable of detecting motion when the surrounding area has a light intensity lower than 5 Lux. The motion sensor circuit will activate, and the light will automatically turn on using electricity. The light will turn off within 15 seconds if there is no one present in the area (motion detection range: 120 degrees, distance: 5 meters)
    • The operation can be tested manually (Manual Test)

    Circuit Systems

    • Controlled by an 8-bit microcontroller circuit
    • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned

    Protection Features

    • AC and DC fuse to prevent current overload
    • Surge Protection.
    • IP20 dust and water resistant

    Features to Extend Battery Life

    • An innovative 3 Steps Charger
    • A Low Voltage Cut-Off to prevent the battery from draining completely

    Warning Systems

    • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery

    Indicators

    Indication SGM Series
    LED AC
    Indicates that the unit is receiving a power supply
    LED On/Test
    Indicates that the unit is receiving a power /
    Indicates that the unit is set to perform automatic self-tests /
    Indicates if the unit is performing a self-test
    LED Charge/Fail
    Indicates that the unit’s battery is charging
    or is a problem with the battery
    LDR
    Light detector sensor
    Switch Off/Test
    Press to turn off the lamp and the system of the unit
    (while the power is off or the unit is not plugged in) /
    Press to test the device’s availability
    (during normal circumstance and the unit is plugged in)

    Dimensions (mm)

    Asset 1
    Asset 3
    Asset 2
    Asset 4

    SGM Series | Spec Sheets

    Model
    Lamp (Bulb)
    Lamp (Wattage)
    Battery Capacity
    Back up (hr.)
    Length (mm)
    Width (mm)
    Height (mm)
    Weight (kgs.)
    SGM209CD3
    2
    9
    3.2V- 6000mAh
    3
    210
    70
    216
    1.36
    Warranty conditions
    คู่มือการใช้งานรุ่นอื่น ๆ