EX Series 1

Our Products / Emergency Exit Sign Lighting / EX Series 1

Exit Sign Light Surface Wall and Ceiling Mounted
EX Series 1 (Box Type)

The EXS1-10LED (Single sided / Double sided) emergency exit sign can be surface wall mounted and ceiling mounted. The LEDs used for illumination are SMD low Power High Lumen type. Its uses SMT technology that consumes 6 times less electricity than those using fluorescent bulbs with 7 times longer operational life,the quality and brightness of illumination is also certified by the Thai industrial Standard 2430-2552 and Thailand Engineering Standard 021004-18 The unit uses Ni-MH (Nikle Metal Hydride) batteries that are smaller but more efficient This enable the unit to operate for 2.0 hours on battery power. The sign is made with white semi-translucent acrylic that evenly diffuse the light throughout the whole sign, even after an extended period of use. steel The chassis is made with 1 mm. thick Electro-Galvanized sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.

Exit Sign Light Surface Wall and Ceiling Mounted
EX Series 1 (Box Type)

The EXS1-10LED (Single sided / Double sided) emergency exit sign can be surface wall mounted and ceiling mounted. The LED used for illumination are SMD low Power High Lumen type. Its uses SMT technology that consumes 6 times less electricity than those using fluorescent bulbs with 7 times longer operational life,the quality and brightness of illumination is also certified by the Thai industrial Standard 2430-2552 and Thailand Engineering Standard 021004-18 The unit uses Ni-MH (Nikle Metal Hydride) batteries that are smaller but more efficient This enable the unit to operate for 2.0 hours on battery power. The sign is made with white semi-translucent acrylic that evenly diffuse the light throughout the whole sign, even after an extended period of use. The chassis is made with 1 mm. thick Electro-Galvanized steel sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.

Technical Specifications​

Mode of Operation
Maintained
Input Voltage
220 VAC / 50Hz ± 10%
LED Lamp Power
10W
LED Color Temperature
6,500k – 7,000k
Battery Type
Ni-MH
Charge Current (max)
0.1C / Cell
Charge Termination Voltage
1.4V/Cell
Charging Time
12 Hrs.
Protections
• AC,DC Fuse.
• Battery Low Voltage Cut-Off
Testing Systems
Manual Testing
Backup Time
2.0 Hrs.
Housing
Electro-galvanized steel sheet 1mm.
thick with epoxy powder coating
Dimensions (LxWxH)
400 x 60 x 195 mm.
Weight
1.70 Kg. / Single sided
1.40 Kg. / Double sided
IP Rating
20
Mounting Type
Surface Ceiling (Type C) / Wall (Type W)
Viewing Distance
24 m (Pictogram Height 10 CM)

Features

User Manual & Demonstration VDO

Play Video

Legend Panel Format

Installation

Indicators

LED AC.
Indicating input status.
LED Full
Indicating the battery is fully charged.
LED Charge
Indicating charging status.
Switch On
For turning on device (not plugged in).
Switch Off
For truning off the device (not plugged in).
Switch Test
For testing device availability (during normal circumstance).

Dimensions (mm)

EX Series 1 | Spec Sheets

Model
Sided
Battery Capacity
LED Strip Lamp
Back up (hr.)
Length (mm)
Width (mm)
Height (mm)
Weight (kgs.)
EXS1-10LED/S
1
1,800 mAh. (1.2Vx3)
10W
2.0
400
60
195
1.70
EXS1-10LED/D
2
1,800 mAh. (1.2Vx3)
10W
2.0
400
60
195
1.40