SG Series
Our Products / Self-Contained Emergency Lighting / SG Series
Self-Contained Emergency Light Luminaires
The emergency light comes with an Auto Check system that continuously monitors the performance of the device and automatically alerts any abnormalities in key components such as the battery, bulbs, fuses, lighting circuits, and battery charging system. It provides notifications when the device is not ready for use, ensuring confidence in its operation. In the event of a sudden power outage caused by electrical disturbances, it utilizes a lightweight Lithium Iron Phosphate (LiFePO4) battery that offers long service life, high energy output, and minimal environmental impact. The battery charging system incorporates a new innovation called the 3 Steps Charger (patent number 15955), surpassing other charging systems, to ensure complete protection during the battery charging process
Technical Specifications
Mode of Operation | Non-Maintained |
Operation Temperature
| -10 to 50°C
|
Input Voltage | 220-240VAC / 50Hz
|
LED Lamp Power | 9W / 12W Per Bulb (2 options)
|
Color Temperature | Daylight (6000K ± 250K)
|
Luminous Intensity
| 726 lm, Daylight (9W) 910 lm, Dayligh (12W) |
Rated Beam Angle | 45Deg
|
Battery Type | Lithium Iron Phosphate (LiFePO4)
|
Protection Features
| • AC,DC Fuse. • Battery Low Voltage Cut-Off • Surge Protection |
Testing Systems | • Auto Check • Auto Test • Manual Test or Remote Test |
Charging Method
| 3 Steps Charger System
|
Charging Period
| 10-15 Hrs
|
Backup Time | 3.0 / 4.0 / 6.0 Hrs. (3 options)
|
Housing | Plastic ABS Casing
|
Dimensions (LxWxH) | 210 x 70 x 216 mm
|
Weight | 1.24-1.40 Kg
|
Degree of Protection
| IP20 |
Mounting
| Wall Surface
|
Accessory
| Infrared Remote Test (RT-S3)
|
Standards / Compliance
| • TIS.902 Part2(22)-2560 • TIS.1955-2551 • ISO9001 • CE |
Features
- Bulb
- Highly efficient and super bright 9 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours
- Battery
- Use Lithium Iron Phosphate (LiFePO4) 3.2V-6000mAh, It has the advantages of light weight, long service life and high power. It also causes less pollution
- Functions
- Auto Check for key components abnormalities such as the battery, bulbs, fuses, lighting circuits, and battery charging system
- Auto Test schedule: 1 month every 60 seconds, 1 year every 120 minutes (according to standard TIS.021004-22), activate and deactivate functions with a remote control
- The operation can be tested manually (Manual Test)
- A 5-second, 30-minute or 60-minute self-test can be performed on the unit using the remote
- Circuit Systems
- Controlled by an 8-bit microcontroller circuit
- A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned
- Protection Features
- AC and DC fuse to prevent current overload
- Surge Protection
- IP20 dust and water resistant
- Features to Extend Battery Life
- An innovative 3 Steps Charger
- A Low Voltage Cut-Off to prevent the battery from draining completely
- Continuous monitoring and checking system for the battery charging status
- Battery voltage change rate monitoring system with respect to time (dv/dt)
- Warning Systems
- Alert for device not ready for use
- Alert for AC input not connected to the device and notification for rectifier circuit malfunction
- An LED will blink 3 times every 15 seconds to indicate that the system performs an automatic battery test (Auto Test) and detects that the backup lighting emergency duration is less than 120 minutes (Battery Fail)
- An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery
- An LED will blink 5 times every 15 seconds to indicate that an abnormality in the lighting system
User Manual & Demonstration VDO
Indicators
LED AC
| Indicates that the unit is receiving a power supply
|
LED On/Test
| Indicates that the unit is receiving a power / Indicates that the unit is set to perform automatic self-tests / Indicates if the unit is performing a self-test |
LED Charge/Fail
| Indicates that the unit’s battery is charging
or is a problem with the battery |
IR | Infrared signal receiver
|
Switch Off/Test
| Press to turn off the lamp and the system of the unit (while the power is off or the unit is not plugged in) / Press to test the device’s availability (during normal circumstance and the unit is plugged in) |