CU-IP66 Series

Our Products / Weatherproof IP66 / CU-IP66 Series

ไฟฉุกเฉินกันน้ำกันฝุ่น มาตราฐาน IP66

Weatherproof Self-Contained Emergency Light Luminaires

The Self-Contained Emergency Light Luminaires CU- P66 Series uses SMD LED lamps for lighting. The device is controlled by the microcontroller. Thus, it can be activated by either pressing the Function Test button on the device or by remote testing. The hosing is made from Grade 304 stainless steel protected against jets of water and dust tight. certified by Electrical and Electronics Institute for IP 66 standard.

Technical Specifications​

Mode of Operation
Non-Maintained
Input Voltage
220 VAC / 50Hz ± 10%
Output Voltage
12VDC
LED Lamp Power
9W / 12W Per Bulb (2 options)
Color Temperature
6,000k – 250k
3,000k – 250k
Rated Beam Angle
50Deg
Battery Type
Sealed Lead-Acid Maintained Free
Protections
• AC,DC Fuse.
• Battery Low Voltage Cut-Off
• Surge Protection
Testing Systems
• Automatic Testing
• Manual Testing or Remote Testing
Charging Mode
Constant Voltage & Limit Current
Charging Current
0.1C / Cell
Charging Time
10-15 Hrs.
Backup Time
3.0 / 4.0 Hrs. (2 options)
Housing
Grade 304 stainless steel
Dimensions (LxWxH)
270 x 90 x 250 mm.
Weight
3.41-4.42 Kg.
IP Rating
66

Features

Indicators

LED AC.
Indicating input status
LED Charge/Full
Indicating charging status
LED On
Indicates ready for use status.
LED 5 sec
Indicating that the 5 seconds test is enable
LED 30 mins
Indicating that the 30 minutes test is enable
LED 60 mins
Indicating that the 60 minutes test is enable
Switch On/Off
For turning on/off the light (not plugged in)
IR receiver
An infrared receiver

Dimensions (mm)

CU-IP66 Series | Spec Sheets

Model
Lamp (Bulb)
Lamp (Wattage)
Battery Capacity
Back up (hr.)
Length (mm)
Width (mm)
Height (mm)
Weight (kgs.)
CU209ST4
2
9
12V-5Ah
4.0
270
90
250
3.84
CU212ST3
2
12
12V-5Ah
3.0
270
90
250
4.42