TM Series
Our Products / Emergency Exit Sign Lighting / TM Series
Previous
Next
Self-Contained Emergency Light Luminaires
The emergency lighting that can be more than just a backup power source when the electricity goes out, but also utilizes the bulbs from the device to provide illumination from normal electricity when the power is not out. This can be controlled via a remote control, and users can set a timer function to activate it for up to 12 hours. Once the set time is complete, the light bulb will automatically turn off. The emergency lamp uses high-quality LED bulbs with a lifespan of over 50,000 hours. The housing is made of heat-resistant ABS plastic.
Technical Specifications
Mode of Operation | Non-Maintained |
Operation Temparature
| -10 to 50°C
|
Input Voltage | 220-240VAC / 50Hz
|
LED Lamp Power | 9W / Bulb
|
Color Temperature | Daylight (6000K ± 250K)
|
Luminous Intensity
| 726 lm, Daylight
|
Rated Beam Angle | 45Deg
|
Battery Type | Lithium Iron Phosphate (LiFePO4)
|
Protection Features
| • AC,DC Fuse. • Battery Low Voltage Cut-Off • Surge Protection |
Testing Systems | Manual Test
|
Charging Method
| 3 Steps Charger System
|
Charging Period
| 10-15 Hrs
|
Backup Time | 3.0 Hrs.
|
Housing | Plastic ABS Casing
|
Dimensions (LxWxH) | 210 x 70 x 216 mm
|
Weight | 1.50 Kg
|
Degree of Protection
| IP20 |
Mounting
| Wall Surface
|
Accessory
| Infrared Remote Control (RT-S2)
|
Standards / Compliance
| • TIS.902 Part2(22)-2560 • TIS.1955-2551 • ISO9001 • CE |
Features
- Bulb
- Highly efficient and super bright 9 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours
- Battery
- Use Lithium Iron Phosphate (LiFePO4) 3.2V-6000mAh, backup power for 3 hours.It has the advantages of light weight, long service life and high power. It also causes less pollution
- Functions
- The system is operated through a remote control, allowing users to set the timer for activation. The available options for setting the timer are 1, 2, 3, 6, and 12 hours. Once the device has been running for the designated time, the light bulb will automatically turn off (Timer Function)
- The operation can be tested manually (Manual Test)
- With power input delay system to keep the emergency light on for a further 5 seconds once normal power supply has returned.
- Circuit Systems
- Controlled by an 8-bit microcontroller circuit
- A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned
- Protection Features
- AC and DC fuse to prevent current overload
- Surge Protection
- IP20 dust and water resistant
- Features to Extend Battery Life
- An innovative 3 Steps Charger
- A Low Voltage Cut-Off to prevent the battery from draining completely
- Continuous monitoring and checking system for the battery charging status
- Warning Systems
- An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery
- Alert for device not ready for use
- Alert for AC input not connected to the device and notification for rectifier circuit malfunction
Indicators
LED AC | Indicates that the unit is receiving a power supply
|
LED On/Timer
| Indicates that the unit is receiving a power / Indicates the status when setting the timer using the remote |
LED Charge/Fail
| Indicates that the unit’s battery is charging
or is a problem with the battery |
IR
| Infrared signal receiver
|
Switch Off/Test
| Press to turn off the lamp and the system of the unit (while the power is off or the unit is not plugged in) / Press to test the device’s availability (during normal circumstance and the unit is plugged in) |
Dimensions (mm)
TM Series | Spec Sheets
Model | Lamp (Bulb) | Lamp (Wattage) | Battery Capacity | Back up (hr.) | Length (mm) | Width (mm) | Height (mm) | Weight (kgs.) |
|---|---|---|---|---|---|---|---|---|
TM209CD3
| 2 | 9 | 3.2V-
6000mAh
| 3 | 210 | 70 | 215 | 1.5 |