SL Series 6
Our Products / Emergency Exit Sign Lighting / SL Series 6
Exit Sign Light Surface Wall and Ceiling Mounted
SL Series 6 (Slim Line-C,W)
Emergency Exit Sign Light SLS6 (Slim LIne) is designed for ceiling and wall installation. It has an ECO mode energy saving function that reduces electricity usage by around
50% during standby mode, while still maintaining illumination levels according to Thai Industrial Standards Institute and Engineering Institute of Thailand standards. The sign’s symbol display panels are constructed using layered acrylic sheets. The middle layer utilizes Transparent Acrylic, which serves as a medium for transmitting light generated by LEDs. It also uses milky white acrylic sheets with light-diffusing properties across the entire panel after extended usage, complying with TIS 2430-2552 and EIT 021004-22 standards. The housing is Aluminium Extrusion with epoxy powder coating enameled to help protect from any possible rust.
Exit Sign Light Surface Wall and Ceiling Mounted
SL Series 6 (Slim Line-R)
Emergency Exit Sign Light SLS6 (Slim Line) is designed for recessed installation. It has an ECO mode energy saving function that reduces electricity usage by around 50% during standby mode, while still maintaining illumination levels according to Thai Industrial Standards Institute and Engineering Institute of Thailand standards. The sign’s symbol display panels are constructed using layered acrylic sheets. The middle layer utilizes Transparent Acrylic, which serves as a medium for transmitting light generated by LEDs. It also uses milky white acrylic sheets with light-diffusing properties across the entire panel after extended usage, complying with TIS 2430-2552 and EIT 021004-22 standards. The housing is made with 1 mm. thick Electro-Galvanized steel sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.
Technical Specifications
Mode of Operation | Maintained
|
Operation Temparature
| 10 to 50°C
|
Input Voltage | 220-240VAC / 50Hz
|
LED Lamp Power | 10W
|
Color Temperature | 6500K – 7000K
|
Battery Type | Lithium Iron Phosphate (LiFePO4)
|
Protection Features | • AC,DC Fuse. • Battery Low Voltage Cut-Off • Surge Protection |
Testing Systems | • Auto Test • Manual Test or Remote Test |
Charging Method
| 3 Steps Charger System
|
Charging Period
| 10-15 Hrs
|
Charging Time | 10-15 Hrs. |
Backup Time | 3.0 Hrs.
|
Housing | Aluminium Extrusion with epoxy powder coating (Type C,W)
Electro-galvanized steel sheet 1mm. thick with epoxy powder coating (Type R) |
Dimensions (LxWxH) | 345 x 36 x 226 mm (Type C) 345 x 40 x 233 mm (Type W) 415 x 105 x 220 mm (Type R) |
Weight | 1.28-1.84 Kg |
Degree of Protection
| IP20
|
Mounting
| Surface Ceiling (Type C) / Wall (Type W) / Recessed Ceiling (Type R)
|
Viewing Distance
| 24 M (Pictogram Height 10 CM)
|
Accessory
| Infrared Remote Test (RT-S3)
|
Standards / Compliance
| • TIS.1955-2551 • ISO9001 • CE |
Features
- Bulb
- Highly efficient and super bright 10 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours
- Battery
- Use Lithium Iron Phosphate (LiFePO4) 3.2V-2000mAh, backup power for 3 hours. It has the advantages of light weight, long service life and high power. It also causes less pollution
- Functions
- Auto Test schedule: 1 month every 60 seconds, 1 year every 120 minutes (according to standard TIS.021004-22), activate and deactivate functions with a remote control
- The operation can be tested manually (Manual Test)
- A 5-second, 30-minute or 60-minute self-test can be performed on the unit using the remote
- Circuit Systems
- Controlled by an 8-bit microcontroller circuit
- Protection Features
- AC and DC fuse to prevent current overload
- Surge Protection
- IP20 dust and water resistant
- Features to Extend Battery Life
- An innovative 3 Steps Charger System
- A Low Voltage Cut-Off to prevent the battery from draining completely
- Warning Systems
- An LED will blink 3 times every 15 seconds to indicate that the system performs an automatic battery test (Auto Test) and detects that the backup lighting emergency duration is less than 120 minutes (Battery Fail)
- An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery (Charging Fail)
Legend Panel Format
Installation
Indicators
Switch Off/Test | Press to turn off the lamp and the system of the unit
(while the power is off or the unit is not plugged in) / Press to test the device’s availability (during normal circumstance and the unit is plugged in) |
LED AC | Indicates that the unit is receiving a power supply |
LED Charge/Full | Indicates that the unit’s battery is charging
|
IR
| Infrared signal receiver
|
LED On/Test
| Indicates that the unit is receiving a power / Indicates if the unit is performing a self-test |
LED Fail
| Indicates there is a problem with the battery |
Dimensions (mm)
SL Series 6 | Spec Sheets
Model | Sided | Battery Capacity | LED Strip Lamp | Back up (hr.) | Length (mm) | Width (mm) | Height (mm) | Weight (kgs.) |
|---|---|---|---|---|---|---|---|---|
SLS6-10LED/S ( C )
| 1 | 3.2V2000 mAh
| 10W
| 3.0
| 345
| 36 | 226 | 1.28 |
SLS6-10LED/S ( W )
| 1 | 3.2V2000 mAh
| 10W
| 3.0 | 345
| 40 | 223 | 1.43 |
SLS6-10LED/D ( C )
| 2 | 3.2V2000 mAh
| 10W
| 3.0 | 345
| 36 | 226 | 1.28 |
SLS6-10LED/S ( R ) | 1 | 3.2V2000 mAh
| 10W
| 3.0 | 415
| 105 | 220 | 1.84 |
SLS6-10LED/D ( R ) | 2 | 3.2V2000 mAh
| 10W
| 3.0 | 415
| 105 | 220 | 1.84 |