SL Series 2

Our Products / Emergency Exit Sign Lighting / SL Series 2

Exit Sign Light Surface Wall and Ceiling Mounted
SL Series 2 (Slim Type)

The SLS2-10LED (Single sided / Double sided) emergency exit sign can be recessed mounted.
The LEDs used for illuminationare SMD low Power High Lumen type. Its uses SMT technology that consumes 6 times less electricity than those using fluorescent bulbs with 7 times longer operational life, the quality and brightness of illumination is also certified by the Thai industrial Standard 2430-2552 and Thailand Engineering Standard 021004-18.
The unit uses Ni-MH (Nikle Metal Hydride) batteries that are smaller but more efficient This enable the unit tooperate for 3.0 hours on battery power.
The sign is made with clear acrylic sheet that evenly diffuse the light throughout the whole sign, even after an extended period of use.
The chassis is made with 1 mm. thick Electro-Galvanized steel sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.

Exit Sign Light Surface Wall and Ceiling Mounted
SL Series 2 (Slim Type)

The SLS2-10LED (Single sided / Double sided) emergency exit sign can be recessed mounted. The LEDs used for illuminationare SMD low Power High Lumen type. Its uses SMT technology that consumes 6 times less electricity than those using fluorescent bulbs with 7 times longer operational life, the quality and brightness of illumination is also certified by the Thai industrial Standard 2430-2552 and Thailand Engineering Standard 021004-18.
The unit uses Ni-MH (Nikle Metal Hydride) batteries that are smaller but more efficient This enable the unit to operate for 3.0 hours on battery power.
The sign is made with clear acrylic sheet that evenly diffuse the light throughout the whole sign, even after an extended period of use.
The chassis is made with 1 mm. thick Electro-Galvanized steel sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.

Technical Specifications​

Mode of Operation
Maintained
Input Voltage
220 VAC / 50Hz ± 10%
LED Lamp Power
10W
LED Color Temperature
6,500k – 7,000k
Battery Type
Ni-MH
Charge Current (max)
0.1C / Cell
Charge Termination Voltage
1.4V/Cell
Charging Time
12 Hrs.
Protections
• AC,DC Fuse.
• Battery Low Voltage Cut-Off
Testing Systems
Manual Testing
Backup Time
3.0 Hrs.
Housing
Electro-galvanized steel sheet 1mm.
thick with epoxy powder coating
Weight
1.80-1.88 Kg.
IP Rating
20
Mounting Type
Surface Ceiling (Type C) / Wall (Type W) /
Recessed (R)
Viewing Distance
24 m

Features

User Manual & Demonstration VDO

Play Video

Legend Panel Format

Installation

Indicators

LED AC.
Indicating input status
LED Full
Indicating the battery is fully charged.
LED Charge
Indicating charging status.
Switch On
For turning on the device (not plugged in)
Switch Off
For turning off the device (not plugged in)
Switch Test
For testing the device’s availability (during normal circumstance)

Dimensions (mm)

SL Series 2 | Spec Sheets

Model
Side
Battery Capacity
LED Strip Lamp
Back up (hr.)
Length (mm)
Width (mm)
Height (mm)
Weight (kgs.)
SLS2-10LED/S (C,W)
1
2,100 mAh. (1.2Vx3)
10W
3.0
410
80
220
1.80
SLS2-10LED/S (R)
1
2,100 mAh. (1.2Vx3)
10W
3.0
430
100
220
1.88
SLS2-10LED/D (C,W)
2
2,100 mAh. (1.2Vx3)
10W
3.0
410
80
220
1.80
SLS2-10LED/D (R)
2
2,100 mAh. (1.2Vx3)
10W
3.0
430
100
220
1.88