SG-R Series

    Our Products / Self-Contained Emergency Lighting / SG-R Series

    Previous
    Next

    Self-Contained Emergency Light Luminaires SG CD-R Series

    Emergency lights that support recessed mounting enhance the aesthetics of buildings and spaces. The heads of the emergency light fixtures can independently adjust the direction of the emergency light to the desired area using LED and a power rating of 9 watts, with a total of 2 heads for providing bright light.
    The device is controlled by the microcontroller. Thus, it can be activated by either
    pressing the Function Test button on the device or by remote testing.
    The housing is made with 1 mm. thick Electro-Galvanized steel sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.

    SG CD-R Series

    SG CD-R Series

    Self-Contained Emergency Light Luminaires SG DLC-R Series

    Emergency lights that support recessed mounting enhance the aesthetics of buildings and spaces.The heads of the emergency light fixtures can adjust the direction of the emergency light to the desired area using LEDs with a power rating of 9 watts each. There are a total of 2 heads, providing bright light.
    The device is controlled by the microcontroller. Thus, it can be activated by either
    pressing the Function Test button on the device or by remote testing.
    The housing is made with 1 mm. thick Electro-Galvanized steel sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.

    SG DLC-R Series

    SG DLC-R Series

    Technical Specifications​
    Mode of Operation
    Non-Maintained
    Operation Temparature
    10 to 50°C
    Input Voltage
    220-240VAC / 50Hz
    LED Lamp Power
    9W Per Bulb
    Color Temperature
    Warm White (3000K ± 250K)
    Daylight (6000K ± 250K)
    Luminous Intensity
    833.5 lm, Warm White
    726 lm, Daylight
    Rated Beam Angle
    45° ± 5°
    Battery Type
    Lithium Iron Phosphate (LiFePO4)
    Protection Features
    • AC,DC Fuse.
    • Battery Low Voltage Cut-Off
    • Surge Protection
    Testing Systems
    • Auto Check
    • Auto Test
    • Manual Test or Remote Test
    Charging Mode
    3 Steps Charger System
    Charging Period
    10-15 Hrs
    Backup Time
    3.0 / 6.0 Hrs. (2 options)
    Housing
    Electro-galvanized steel sheet,
    1mm. thick with epoxy powder coating.
    Dimensions (LxWxH)
    260 x 140 x 150 mm (CD)
    295 x 138 x 62 mm (DLC)
    Weight
    1.40-1.58 Kg
    Degree of Protection
    IP20
    Mounting
    Recessed Ceiling
    Accessory
    Infrared Remote Test (RT-S3)
    Standards / Compliance
    • TIS.902 Part2(22)-2560
    • TIS.1955-2551
    • ISO9001
    • CE

    Features

    • Highly efficient and super bright 9 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours
    • Use Lithium Iron Phosphate (LiFePO4) 3.2V-6000mAh, It has the advantages of light weight, long service life and high power. It also causes less pollution
    • Auto Check for key components abnormalities such as the battery, bulbs, fuses, lighting circuits, and battery charging system (patent number 21778)
    • Auto Test schedule: 1 month every 60 seconds, 1 year every 120 minutes (according to standard TIS.021004-22), activate and deactivate functions with a remote control
    • The operation can be tested manually (Manual Test)
    • A 5-second, 30-minute or 60-minute self-test can be performed on the unit using the remote
    • Controlled by an 8-bit microcontroller circuit
    • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned
    • AC and DC fuse to prevent current overload
    • Surge Protection
    • IP20 dust and water resistant
    • An innovative 3 Steps Charger
    • A Low Voltage Cut-Off to prevent the battery from draining completely
    • Continuous monitoring and checking system for the battery charging status
    • Battery voltage change rate monitoring system with respect to time (dv/dt)
    • Alert for device not ready for use
    • Alert for AC input not connected to the device and notification for rectifier circuit malfunction
    • An LED will blink 3 times every 15 seconds to indicate that the system performs an automatic battery test (Auto Test) and detects that the backup lighting emergency duration is less than 120 minutes (Battery Fail)
    • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery
    • An LED will blink 5 times every 15 seconds to indicate that an abnormality in the lighting system

    User Manual & Demonstration VDO

    Indicators
    LED AC.
    Indicates that the unit is receiving a power supply
    LED On/Test
    Indicates that the unit is receiving a power / Indicates that the unit is set to perform automatic self-tests / Indicates if the unit is performing a self-test
    LED Charge/Fail
    Indicates that the unit’s battery is charging or is a problem with the battery
    IR
    Infrared signal receiver
    Switch Off/Test
    Press to turn off the lamp and the system of the unit (while the power is off or the unit is not plugged in) / Press to test the device’s availability (during normal circumstance and the unit is plugged in)

    Dimensions (mm)

    SG DLC-R Series

    ด้านบน
    ด้านหน้า
    ด้านล่าง
    ด้านข้าง

    SG CD-R Series

    ด้านบน
    ด้านหน้า
    ด้านล่าง
    ด้านข้าง

    SG-R Series | Spec Sheets

    Model
    Lamp (Bulb)
    Lamp (Wattage)
    Battery Capacity
    Back up (hr.)
    Length (mm)
    Width (mm)
    Height (mm)
    Weight (kgs.)
    SG209CD3-R
    2
    9
    3.2V-6000mAh
    3
    260
    140
    150
    1.40
    SG209CD6-R
    2
    9
    3.2V-6000mAhx2
    6
    260
    140
    150
    1.55
    SG209DLC3-R
    2
    9
    3.2V-6000mAh
    3
    295
    138
    62
    1.42
    SG209DLC6-R
    2
    9
    3.2V-6000mAhx2
    6
    295
    138
    62
    1.58
    Warranty conditions
    All product manuals