MEM Series



  • Highly efficient and super bright LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours.


  • Nickel Metal Hydride 12V – 1.2Ah that can provide 2 hours of emergency power.


  • The Motion Sensor function can be enabled or disabled.
  • A 5-second, 30-minute or 60-minute self-test can be performed on the unit using the remote.
  • The 30-minute self-test that the unit will automatically perform every 30 days can be turned on or off.

Circuit Systems

  • Controlled by an 8-bit microcontroller circuit.
  • An Autoactivation circuit when under voltage occurs.
  • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned.

Protection Features

  • AC and DC fuse to prevent current overload
  • Surge Protection.

Features to Extend Battery Life

  • A charging circuit to regulate that the battery is charged with a constant voltage and not too high a current.
  • A Low Voltage Cut-Off to prevent the battery from draining completely

Warning Systems

  • An audible alarm will sound twice every 15 seconds to indicate that the battery should be charged.
  • An audible alarm will sound once every 15 seconds to indicate that the battery is about to run out of charge.
  • An LED will blink 3 times every 15 seconds to indicate that the battery only has less than 30 minutes of charge.
  • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery.


MEM209CD2 |

Select options


More Details

Distribution Channels

The MEM209CD2 self-contained emergency light has a modern and compact design with special functions not available in other units. It has both a motion and a light sensor to provide maximum functionality for the user for multiple use cases. During power outages the unit will provide illumination using battery power. During normal power conditions, if the surrounding area is dimmer than 5 Lux and the unit detects a person walking by, it will automatically provide illumination using mains power and will turn off automatically after 15 seconds when there is no one left in the area. This extra functionality can be enabled or disabled by the user.
The casing is produced from 1mm thick Electro-Galvanized steel coated with Epoxy powder and special chemicals to prevent any possible rust.

Mode of Operation


Input Voltage

220 VAC / 50Hz±10%

Output Voltage


LED Lamp Power (2)


Color Temperature

Warm White & Daylight

Battery Size


Charging Mode

Constant Voltage & Limit Current

Charging Current


Charging Time

10-15 Hrs.

Backup Time

2.0 Hrs.

IP Rating

IP 20


Auto test and Remote test



Advanced Features

Battery Checker, Motion Sensor