Loading...

MEL Series

PRODUCT FEATURES

Bulb

  • Highly efficient and super bright LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours.

Battery

  • Lithium-ion 11.1V – 2.2Ah batteries that can provide 3 hours of power. It is light, has a long operational life and is able to provide a high load.

Functions

  • The Light Detector (LDR) function can be enabled or disabled
    A 5-second, 30-minute or 60-minute self-test can be performed on the unit using the remote.
  • The 90-minute self-test that the unit will automatically perform every 3 monthscan be turned on or off.

Circuit Systems

  • Controlled by an 8-bit microcontroller circuit.
  • An Autoactivation circuit when under voltage occurs
  • A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned.

Protection Features

  • AC and DC fuse to prevent current overload.
  • Surge Protection.

Features to Extend Battery Life

  • An innovative 3 Steps Charger
  • A Low Voltage Cut-Off to prevent the battery from draining completely.

Warning Systems

  • An audible alarm will sound twice every 15 seconds to indicate that the battery should be charged.
  • An audible alarm will sound once every 15 seconds to indicate that the battery is about to run
  • An LED will blink 3 times every 15 seconds to indicate that the battery only has less than 90 minutes of charge.
  • An LED will blink 4 times every 15 seconds to indicate that there is a problem charging the battery

DOWNLOAD SPEC SHEET

| MEL209CD3 |

Select options

More Details

Distribution Channels

The MEL209CD3 self-contained emergency light has a modern and compact design with 3 main functions to offer users maximum value.
1. With the Light Detector function (pending patent number 1803002688), if during power outages the unit detects that the brightness in the area is higher than 5 Lux it will not turn on. This will help to conserve the unit’s battery for use when it is necessary.
2. The Battery Checker function (patent number 16653) will warn the user to charge the battery if it has not been charged in a long time or if its charge falls below 70%.
3. The Low Voltage Sound indicator will warn the user that the battery is low on charge and the unit’s lamp is about to turn off.
The casing is produced from 1mm thick Electro-Galvanized steel coated with Epoxy powder and special chemicals to prevent any possible rust.

Mode of Operation

Non-Maintained

Input Voltage

220 VAC / 50Hz±10%

Output Voltage

12VDC

LED Lamp Power (2)

9W

Color Temperature

Warm White & Daylight

Rated Beam Angle

50Deg

Battery Type

Lithium-ion battery

Battery Size

11.1V-2.2Ah

Charging Mode

3 Step Charger System

Charging Current

220mA.

Charging Time

10-15 Hrs.

Backup Time

3.0 Hrs.

IP Rating

IP 20

Features

Auto test and Remote test

Mounted

Wall

Advanced Features

Battery Checker, Light Detector