EX Series 1
Our Products / Emergency Exit Sign Lighting / EX Series 1
Exit Sign Light Surface Wall and Ceiling Mounted
EX Series 1 (Box Type)
The EXS1-10LED (Single sided / Double sided) emergency exit sign can be surface wall mounted and ceiling mounted. The LEDs used for illumination are SMD low Power High Lumen type. Its uses SMT technology that consumes 6 times less electricity than those using fluorescent bulbs with 7 times longer operational life,the quality and brightness of illumination is also certified by the Thai industrial Standard 2430-2552 and Thailand Engineering Standard 021004-18 The unit uses Ni-MH (Nikle Metal Hydride) batteries that are smaller but more efficient This enable the unit to operate for 2.0 hours on battery power. The sign is made with white semi-translucent acrylic that evenly diffuse the light throughout the whole sign, even after an extended period of use. steel The chassis is made with 1 mm. thick Electro-Galvanized sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.
Exit Sign Light Surface Wall and Ceiling Mounted
EX Series 1 (Box Type)
The EXS1-10LED (Single sided / Double sided) emergency exit sign can be surface wall mounted and ceiling mounted. The LED used for illumination are SMD low Power High Lumen type. Its uses SMT technology that consumes 6 times less electricity than those using fluorescent bulbs with 7 times longer operational life,the quality and brightness of illumination is also certified by the Thai industrial Standard 2430-2552 and Thailand Engineering Standard 021004-18 The unit uses Ni-MH (Nikle Metal Hydride) batteries that are smaller but more efficient This enable the unit to operate for 2.0 hours on battery power. The sign is made with white semi-translucent acrylic that evenly diffuse the light throughout the whole sign, even after an extended period of use. The chassis is made with 1 mm. thick Electro-Galvanized steel sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.
Technical Specifications
Mode of Operation | Maintained |
Input Voltage | 220 VAC / 50Hz ± 10% |
LED Lamp Power | 10W |
LED Color Temperature | 6,500k – 7,000k |
Battery Type | Ni-MH |
Charge Current (max) | 0.1C / Cell |
Charge Termination Voltage | 1.4V/Cell |
Charging Time | 12 Hrs. |
Protections | • AC,DC Fuse. • Battery Low Voltage Cut-Off |
Testing Systems | Manual Testing |
Backup Time | 2.0 Hrs. |
Housing | Electro-galvanized steel sheet 1mm. thick with epoxy powder coating |
Dimensions (LxWxH) | 400 x 60 x 195 mm. |
Weight | 1.70 Kg. / Single sided 1.40 Kg. / Double sided |
IP Rating | 20 |
Mounting Type | Surface Ceiling (Type C) / Wall (Type W) |
Viewing Distance | 24 m (Pictogram Height 10 CM) |
Features
- Uses high power LEDs rated at 10 Watts for illumination
- Having LED lifetime of over 50,000 hours.
- Automatically recharged with constant voltage and limited current.
- Battery overcharge protection circuit prevents overcharge which is the cause of battery swelling.
- Battery discharge protection circuit prolongs the battery life.
User Manual & Demonstration VDO
Legend Panel Format
Installation
Indicators
LED AC. | Indicating input status. |
LED Full | Indicating the battery is fully charged. |
LED Charge | Indicating charging status. |
Switch On | For turning on device (not plugged in). |
Switch Off | For truning off the device (not plugged in). |
Switch Test | For testing device availability (during normal circumstance). |
Dimensions (mm)
EX Series 1 | Spec Sheets
Model | Sided | Battery Capacity | LED Strip Lamp | Back up (hr.) | Length (mm) | Width (mm) | Height (mm) | Weight (kgs.) |
|---|---|---|---|---|---|---|---|---|
EXS1-10LED/S | 1 | 1,800 mAh. (1.2Vx3) | 10W | 2.0 | 400 | 60 | 195 | 1.70 |
EXS1-10LED/D | 2 | 1,800 mAh. (1.2Vx3) | 10W | 2.0 | 400 | 60 | 195 | 1.40 |