EDL Series
Our Products / Self-Contained Emergency Lighting / EDL Series
Self-Contained Emergency Downlight EDLS Series
The newly designed EDLS self-contained emergency downlight resembles a regular downlight and is perfect for exposed installations on ceilings of offices, buildings and residents. The beautiful and modern design will enhance the look of any buildings. Using high-quality 9 Watts LEDs providing operational life of more than 50,000 hours. Equipped with an innovative 3 Steps Charger (patent number 15955) to prolong battery life and prevent battery damage. The casing is produced from 1mm thick Electro-Galvanized steel coated with Epoxy powder and special chemicals to prevent any rust from forming. The EDLS self-contained emergency downlight has undergone continued innovation to give maximum value and functions to the users, as can be seen in the feature list.
Technical Specifications
Mode of Operation | Non-Maintained |
Operation Temperature | 0-60°C |
Input Voltage | 220-240 VAC / 50Hz |
LED Lamp Power | 9W / Bulb |
Color Temperature | Warm White (3000K ± 250K)
Daylight (6000K ± 250K) |
Luminous Intensity | – 39 cd (Type E) / 755.1 Lumen (Warm White) – 43 cd (Type E) / 752 Lumen (Daylight |
Rated Beam Angle | 90 ± 2 Deg |
Battery Type / Capacity | Lithium Iron Phosphate (LiFePO4)
6.4V-1200mAh |
Protection Features | – AC, DC Fuse
– Surge Protection |
Testing Systems | – Auto Test
– Remote Test |
Charging Method | 3 Steps Charger System |
Charging Period | 10-15 Hrs. |
Backup Time | 3.0 Hrs. |
Housing | Electro-galvanized steel sheet 1mm. thick with epoxy powder coating |
Dimensions (⌀ x H) | 140 x 47 mm. 140 x 42 mm. |
Weight | 0.48-0.66Kg. |
Degree of Protection | IP20 |
Mounting Type | Surface Ceiling |
Accessory | Infrared Remote Test (RT-S3) |
Standards / Compliance | – TIS.902 Part2(22)-2560
– TIS.1955-2551 – ISO9001 – CE |
Features
Bulb
- Highly efficient and super bright 9 Watts LEDs provides maximum brightness while saving on power consumption. It also offers long operational life of more than 50,000 hours.
Battery
- Lithium Iron Phosphate (LiFePO4) 6.4V-1200mAh
Functions
- Long range remote testing.
- 5-second, 30-minute and 60-minute tests can be activated remotely.
- An automatic 30-minute test can be set to perform every 30 days.
Circuit Systems
- Controlled by an 8-bit microcontroller circuit.
- An Auto activation circuit when under voltage occurs.
- A Timer Delay circuit to keep the unit operating for a few more seconds once normal power has returned.
Protection Features
- AC and DC fuse to prevent current overload.
- Surge Protection.
- IP20 dust and water resistant.
Features to Extend Battery Life
- An innovative 3 Steps Charger.
- A Low Voltage Cut-Off to prevent the battery from draining completely.
Warning Systems
- An LED will blink once every 2 seconds to warn that the Low Voltage Cut-Off is about to activate.
- An LED will blink 3 times every 2 seconds to warn that there is less than 30 minutes of charge left in the battery.
- An LED will blink 4 times every 2 seconds to indicate that there is a problem charging the battery.
Indicators
EDLS
Auto Test | Indicates the unit is self-testing. |
LED Fault | Indicates there is a fault with the unit. |
LED AC. | Indicates the unit is receiving power. |
LED On | Indicates ready for use status. |
EDLT
Timer | Indicate that a timer has been set for the unit to turn off automatically |
LED Charge | Indicate the battery charging status |
LED AC. | Indicate that the unit is receiving a power
supply |
LED On | Indicate that the unit is operational |
Dimensions (mm)
EDLS09-3C, EDLT09-3C
EDLS09-3R, EDLT09-3R
