MCU-R Series

Our Products / Self-Contained Emergency Lighting / MCU-R Series

Self-Contained Emergency Light Luminaires

The Self-Contained Emergency Light Luminaires MCU-R Series uses two MR16 LED lamps for lighting. The device is controlled by the microcontroller. Thus, it can be activated by either pressing the Function Test button on the device or by remote testing. The chassis is made with 1 mm. thick Electro-Galvanized sheets coated with Epoxy powder and stove enameled to help protect from any possible rust.

MCU NC-R Series

MCU DLC-R Series

Technical Specifications


Mode of Operation	Non-Maintained
Input Voltage	220 VAC / 50Hz ± 10%
Output Voltage	12VDC
LED Lamp Power	9W Per Bulb
Color Temperature	6,000k ± 250k 3,000k ± 250k
Rated Beam Angle	50Deg
Battery Type	Sealed Lead-Acid Maintained Free
Protections	• AC,DC Fuse. • Battery Low Voltage Cut-Off • Surge Protection
Testing Systems	• Automatic Testing • Manual Testing or Remote Testing
Charging Mode	Constant Voltage & Limit Current
Charging Current	0.1C / Cell
Charging Time	10-15 Hrs.
Backup Time	2.0 Hrs.
Housing	Electro-galvanized steel sheet, 1mm. thick with epoxy powder coating.
Dimensions (LxWxH)	285 x 170 x 195 mm. 285 x 170 x 120 mm.
Weight	3.45 Kg.
IP Rating	20

Features

Having LED lifetime of over 50,000 hours.
Automatically recharged with constant voltage and limited current.
Battery overcharge protection circuit prevents overcharge which is the cause of battery swelling.
Battery discharge protection circuit prolongs the battery life.
Under voltage protection circuit allows the unit to automatically activate the emergency light in case any fault occurs in the main power distribution system or in case of power failure (140-160VAC).
Allowing testing with a remote control
Equipped with the Auto Test function:
- Every 1 month on the 1st day of the month at 12.00-12.30 hrs.
- Every 6 months on the 1st day of the month at 12.00-13.00 hrs.

User Manual & Demonstration VDO

Play Video

Indicators


LED AC.	Indicating input status
LED Charge/Full	Indicating charging status
LEDBattery	Indicating battery voltage range
LED Fail	Indicating error status
LED 5 sec	Indicating that the 5 seconds test is enable
LED 30 mins	Indicating that the 30 minutes test is enable
LED 60 mins	Indicating that the 60 minutes test is enable
Switch On/Off	For turning on/off the light (not plugged in)
Switch Test	For testing the device’s availability (during normal circumstance)
IR receiver	An infrared receiver
Dimmer	A brightness adjustment button (for HZ model only)