CCU 12V (Figure C)

    สินค้า / Central Battery Systems / CCU 12V Series (Figure C)

    Artboard 13-2
    ccu21c

    Central Battery Control Unit
    รุ่น CCU 12-550 To CCU 12-1900 (Figure C)

    Central Battery Control Unit by CCU Series or the central control unit is used to detect any abnormalities of the main power distribution system. In case of error or emergency, the unit is designed to allow the emergency lighting system to bear large loads or larger loads than that the automatic emergency light (complete unit) can. The 12 VDC unit is compatible with halogen lamp or MR16 LED lamp. The unit installation and usage are centrally controlled so that it supplies power to the lamp installed.

    Technical Specifications​
    Mode of Operation
    Non-Maintained
    Input Voltage
    220 VAC / 50Hz ± 10%
    Output Voltage
    12VDC
    Maximum Power Load
    550W / 620W / 720W / 850W / 1000W / 1100W /
    1400W / 1900W (8 options)
    Battery Type
    Sealed Lead-Acid Maintained Free
    Protections
    • AC. Fuse.
    • DC. Circuit Breaker.
    • AC. Input Over & Under Voltage Protection.
    • Battery Low Voltage cut-off.
    Testing Systems
    Manual Testing
    Charging Mode
    Constant Voltage & Limit Current
    Charging Time
    10-15 Hrs.
    Backup Time
    2.0 Hrs.
    Housing
    Electro-galvanized steel sheet 1mm.
    thick with epoxy powder coating.
    Dimensions (LxWxH)
    620 x 400 x 950 mm.
    Weight
    171.00 Kg.
    IP Rating
    20

    Features

    • Allowing testing with a switch on the front panel.
    • Automatically recharged with constant voltage and limited current.
    • Battery overcharge protection circuit prevents overcharge which is the cause of battery swelling.
    • Battery discharge protection circuit prolongs the battery life.
    • Under voltage protection circuit allows the unit to automatically activate the emergency light in case any fault occurs in the the main power distribution system or in case of power failure (140-160 VAC).
    • Over voltage protection circuit allows the unit to automatically activate the emergency light in case any fault occurs in the the main power distribution system or in case of power failure (260-270 VAC).

    Indicators
    AC. VOLTMETER
    Indicating the input voltage.
    DC. VOLTMETER
    Indicating the battery voltage.
    LED H1
    Indicating the status of
    the input under voltage or over voltage.
    LED Charge/Full
    Indicating charging status.
    SWITCH TEST
    For testing the device’s availability
    (during normal circumstance)
    AC. FUSE
    Short-circuit protection of AC input.
    LED MAIN
    Indicating the status of
    the input voltage of 220VAC.
    LED DC.POWER
    Indicating the status of the output voltage.
    LED FAIL
    Indicating the failure status of the control unit.

    Dimensions (mm)

    CCU 12V Series (Figure C) | Spec Sheets

    Model
    Power (Wattage)
    Battery Capacity
    Back up (hr.)
    Length (mm)
    Width (mm)
    Height (mm)
    Weight (kgs.)
    CCU 12-550
    550
    12V 130Ah
    2.0
    620
    350
    750
    74.00
    CCU 12-620
    620
    12V 130Ah
    2.0
    620
    350
    750
    76.00
    CCU 12-720
    720
    12V 150Ah
    2.0
    620
    350
    750
    77.00
    CCU 12-850
    850
    12V 200Ah
    2.0
    620
    350
    750
    99.50
    CCU 12-1000
    1000
    12V 200Ah
    2.0
    620
    350
    750
    99.50
    CCU 12-1100
    1100
    12V 130Ah x 2
    2.0
    620
    400
    950
    119.00
    CCU 12-1400
    1400
    12V 150Ah x 2
    2.0
    620
    400
    950
    125.00
    CCU 12-1900
    1900
    12V 220Ah x 2
    2.0
    620
    400
    950
    171.00
    Warranty conditions
    All product manuals